The shower is an essential ingredient of every bathroom. People constantly use these showers for different purposes, like taking a bath. Since they have been put to use constantly, the chances of a leak developing in these showers are high. Moreover, the shower trays can also leak, which can flood your bathroom in no time. Fixing any leaks in the shower area is essential. You can call a professional plumber to seal your showers or take up the task yourself. Let us look into some essential tips to correct any leaks in the shower place.
Carefully inspect all the leaks that have developed in and around the shower
If you feel that water is leaking from your shower arena, you need first to diagnose its source. The source can be one or multiple. You need to find all the sources to stop the leak. Moreover, you need to find potential points that can also leak in the future. After finding out all the leak sources, you need to go for the complete shower seal. You can take up the task on your own or hire any professional to get your job done. It is wiser to hire a professional plumber since they have the experience of diagnosing the problems quickly and then perform complete sealing of your shower.
Remove the existing seal on the showers
After diagnosing the sources of the leak, you need to open the shower at those specified regions. Some of the leaks might require you to open the shower parts completely. After you have opened up all the required joints, you need to remove the existing seals. These sealants were applied during installation to prevent any water leak from those regions. However, these sealants might have wearied off over time or while you were opening the joints. The remaining sealant will pose a problem while fixing these joints and give rise to new leak sources. It will help if you take the remaining sealant off completely.
Use silicone sealant to seal the leak regions
After you have removed the existing sealants, you need to clean the area completely. Any deposition at these areas will prevent the new sealant from sitting deeply. You can use hot water or soap water to clean the areas. After ensuring that the joints are clean, apply silicone sealants at these regions. These sealants are tough and do not allow water to pass through. It will help if you keep in mind that the silicone sealant must sit deeply to cover any existing gap. You can use a spatula dipped in soapy water to push the sealants to the deeper regions. After you have sealed the gaps, you need to allow the seal to settle down and harden. You must not use the shower before the seal has hardened.
Shower leaks are a common problem in most bathrooms. The leak can originate in the overhead shower, hand shower, etc. You need to evaluate the source of the leak carefully and apply proper sealant at the leak regions. If you are not confident performing the task yourself, you can help some plumbers near you get the job done.